Kyocera KM-4035

2FD/2FF/2FG
1-4-1
Press the “Management” key.
Press the “Default Setting/Counter” key.
Enter the
management code.
Execute department manage-
ment items (page 1-4-2).
Press the [Close] key.
Press the “Copy default” key.
Press the [Close] key.
Enter the
management code.
Make copy default settings
(page 1-4-3).
Press the “Machine default” key.
Press the [Close] key.
Enter the
management code.
Make machine default settings
(page 1-4-6).
Press the [Close] key.
Enter the
management code.
Make user adjustment
(page 1-4-8).
Press the “User adjustment” key.
Start
Press the “Bypass setting” key.
Press the [Close] key.
Make bypass settings
(page 1-4-7).
Press the “Register orig.
size” key.
Press the [Close] key.
Execute original size
registration (page 1-4-7).
Press the [Close] key.
Press the “Counter check” key.
Check the total counter
(page 1-4-8).
Press the “Document
Management” key.
Press the [Close] key.
Enter the
management code.
Make document management
default settings (page 1-4-8).
Press the “Box Management”
[“Hard Disk Management” key.
Press the [Close] key.
Enter the
management code.
Execute hard disk management
items (page 1-4-8).
Press the “Print report” key.
Output the report
(page 1-4-8).
Press the [Close] key.
Press the “Language” key.
Set the language (page 1-4-8).
End
1-4-1 Copier management
In addition to a maintenance function for service, the copier is equipped with a management function which can be operated
by users (mainly by the copier administrator). In this copier management mode, settings such as default settings can be
changed.
(1) Using the copier management mode