Kyocera KM-4035

Maintenance
Description
item No.
2FD/2FF/2FG
1-4-60
U332 Setting the size conversion factor
Description
Sets the coefficient of nonstandard sizes in relation to the A4/11" × 8
1
/
2
" size. The coefficient set here is used to
convert the black ratio in relation to the A4/11" × 8
1
/
2
" size and to display the result in user simulation.
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/11" × 8
1
/
2
" size for
copy mode, printer mode and fax mode respectively.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select copier mode (COPY), printer mode (PRT) or fax mode (FAX).
2. Change the setting using the cursor up/down keys.
Display Description Setting range Initial setting
COPY Size parameter for copier mode 0.1 to 3.0 1.0
PRT Size parameter for printer mode 0.1 to 3.0 1.0
FAX Size parameter for fax mode 0.1 to 3.0 1.0
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item is displayed.
U341 Specific paper feed location setting for printing function
Description
Sets a paper feed location specified for printer output (only if a printer kit is installed).
Purpose
To use a paper feed location only for printer output.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the paper feed location for the printer. The selected item is displayed in reverse.
Display Description
FIRST Upper drawer
SECOND Lower drawer
THIRD Optional upper drawer
FOURTH Optional lower drawer
LCF Optional large paper deck
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item is displayed.