Kyocera TASKalfa 181 - Checking;Clearing the Time for the Exposure Lamp to Light; Checking the Scanner Count

2KJ/2KH
1-3-66
U990
Checking/clearing the time for the exposure lamp to light
Description
Displays, clears or changes the accumulated time for the exposure lamp to light.
Purpose
To check duration of use of the exposure lamp. Also to clear the accumulated time for the lamp after replace-
ment.
Method
1. Press the start key.
The accumulated time of illumination for the exposure lamp is displayed in minutes.
Setting
1. Select [TIME] using the cursor up/down keys.
2. Change the accumulated time using the numeric key.
3. Press the start key. The accumulated time is set.
Clearing
1. Select [CLEAR] using the cursor up/down keys.
2. Press the start key. The accumulated time is cleared.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U991
Checking the scanner count
Description
Displays the scanner operation count.
Purpose
To check the status of use of the scanner.
Method
1. Press the start key. The screen for the scanner operation count is desplayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
COPY Scanner operation count for copying
FAX Scanner operation count for fax
NWS Network scanner operation count