Kyocera TASKalfa 181 - Unpacking and Installation; Installation Procedure

2KJ/2KH
1-2-2
1-2-2 Unpacking and installation
(1) Installation procedure
Unpack.
Remove the tapes.
Install the optional paper feeder.
Release the scanner pins.
Install the toner container.
Connect the power cord.
Load paper.
Installing toner.
Make test copies.
Attaching the operation label.
Attaching the cover label.
Output an own-status report
(maintenance item U000).
Exit maintenance mode.
Start
Install other optional devices.
Install the waste toner box.
Install the optional original cover or the DP.
Completion of the machine installation.