Kyocera TASKalfa 181

2KJ/2KH
1-3-68
1-3-2 Management mode
In addition to a maintenance function for service, the machine is equipped with a management function which can be oper-
ated by users (mainly by the administrator). In this management mode, settings such as default settings can be changed.
(1) Using the management mode
Select [Job Accounting] and
then press the enter key.
Enter the
management code.
Press the system menu/counter key.
Execute job accounting items
(page 1-3-69).
Select [Copy default] and then
press the enter key.
Enter the
management code.
Make copy default settings
(page 1-3-70).
Press the reset key.
Select [Machine default] and
then press the enter key.
Enter the
management code.
Make machine default settings
(page 1-3-71).
Select [Counter check] and
then press the enter key.
Check the counter
(page 1-3-73).
Select [MP Tray Setting] and
then press the enter key.
Make MP tray settings
(page 1-3-73).
Select [Print report] and then
press the enter key.
Output the report (page 1-3-73).
Start
End
Select [Language] and then
press the enter key.
Select the [End] and
press the enter key.
Press the reset key.
Press the reset key.
Press the reset key.
Set the language (page 1-3-73).