Kyocera TASKalfa 181

2KJ/2KH
1-3-55
U404
Adjusting margins for scanning an original from the DP
Description
Adjusts margins for scanning the original from the DP.
Purpose
Make the adjustment if margins are incorrect when the optional DP is used.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode.
Adjustment
1. Press the start key.
2. Select the item to be adjusted using the cursor up/down keys.
3. Press the interrupt key.
4. Place an original on the DP and press the start key to make a test copy.
5. Change the setting value using the cursor left/right keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
Figure 1-3-19
6. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
U403
(P.1-3-54)
U402
(P.1-3-53)
U404
Display Description
Setting
range
Initial
setting
Change in
value per step
A MARGIN DP left margin 0 to 10.0 2.0 0.1 mm
B MARGIN DP leading edge margin 0 to 10.0 3.0 0.1 mm
C MARGIN DP right margin 0 to 10.0 2.0 0.1 mm
D MARGIN DP trailing edge margin 0 to 10.0 2.0 0.1 mm
Leading edge margin
(3.0±2.5 mm)
Trailing edge margin
(3.0±2.5 mm)
Left margin
(2.5+1.5/-2.0 mm)
Right margin
(2.5+1.5/-2.0 mm)