2KJ/2KH-1
1-3-49
U277
Setting auto application change time
Description
Sets the time that passes until the machine starts automatically printing after completing copying or operation
when the machine is used as a printer.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Change the setting using the cursor left/right keys.
The setting can be changed by 30 s per step.
3. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U285
Setting service status page
Description
Determines displaying the digital dot coverage report on reporting.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Select ON or OFF using the cursor up/down keys.
Initial setting: ON
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U326
Setting the black line cleaning indication
Description
Sets whether to display the cleaning guidance when detecting the black line.
Purpose
Displays the cleaning guidance in order to make the call for service with the black line decrease by the rubbish
on the platen when scanning from the DP.
Setting
1. Press the start key.
2. Select ON or OFF using the cursor up/down keys.
Initial setting: ON
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Description Setting range Default setting
Switching time 30 to 270 (s) 30 (s)
Display Description
ON Displays the digital dot coverage
OFF Not to display the digital dot coverage
Display Description
ON Displays the cleaning guidance
OFF Not to display the cleaning guidance
To Next Page
Loading...
