2KJ/2KH
1-2-19
1-2-5 Installing the cassette heater for paper feeder (option) (22 ppm model only)
Installing the cassette heater requires the following component:
Cassette heater (P/N 303MH94060): for 220 to 240 V specifications only
Cassette heater (P/N 303MH94050): for 120 V specifications
One (1) M3 x 8 P tight screw (P/N 7BB202308H)
Procedure
1. Remove the screw and the pin and then
remove the cassette rear cover.
2. Pull out the cassette.
Figure 1-2-27
3. Pass the cassette heater cable through the
hole at the machine rear side.
4. Insert the stay of the cassette heater into the
hole at the machine rear side.
5. Attach the cassette heater using the M3 x 8
P tight screw.
Figure 1-2-28
Pin
Screw
Cassette rear cover
Cassette heater
Cassette
heater cable
Stay
M3 x 8
P tight screw
To Next Page
Loading...
