2KJ/2KH
1-2-18
4. Pass the cassette heater cable through the
edging and fit the cassette heater to the
machine.
Figure 1-2-25
5. Attach the cassette heater using the M3 x 8
S tight screw.
6. Pass the cassette heater cable through the
clamp. Connect the connector of the cas-
sette heater cable to the connector of the
machine.
7. Refit all the removed parts.
Figure 1-2-26
Cassette heater cable
Edging
Cassette heater
Cassette heater cable
M3 x 8
S tight screw
Connector
Clamp
To Next Page
Loading...
