2KJ/2KH
1-3-36
U110
Checking the drum count
Description
Displays the drum counts for checking.
Purpose
To check the drum status.
Method
1. Press the start key. The drum counter count is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U130
Initial setting for the developing unit
Description
Replenishes toner to the developing unit to a certain level from the toner container that has been installed.
Purpose
To operate when installing the machine or replacing the developing unit.
Method
1. Press the start key.
1. Select [EXECUTE] using the cursor up/down keys.
2. Press the start key. Installation of toner starts and time (minutes) is indicated until the installation ends.
3. When the installation is complete, [FINISHED] will be displayed if the installation is successful or [NG]
will be displayed if it has failed. If [NG] is displayed, check to see if the toner container contains toner
and to see if the toner container sensor malfunctions and then try again.
Completion
Press the stop/clear key after operation is complete. The screen for selecting a maintenance item No. is dis-
played.
Maintenance
item No.
Description
To Next Page
Loading...
