Kyocera TASKalfa 181

2KJ/2KH
1-3-73
Machine administrator management code change
Changes the four-digit management code for the secu-
rity administrator of the other machine.
1. Select [MachineAdminCode] and then press the
enter key.
2. Enter a new security administrator management
code using the numeric keys.
(5) MP Tray setting
Paper size and type
Sets the paper size and paper type for the MP tray set-
tings.
1. Select paper size.
If the paper size is unknown or no particular paper
size setting is required, select [Universal Size].
2. When setting a size, turn on the size input and use
the left/right cursor key to select the paper size.
Setting range:
(Inch specifications)
Width: 3 7/8" to 11 5/8"
Length: 5 7/8" to 17"
(Metric specifications)
Width: 98 to 297 mm
Length: 148 to 432 mm
3. Press the enter key.
4. Select paper type and then press the enter key.
Selecting other standard sizes
Sets a special standard size.
1. Select [Other Regular Size] and then press the
enter key.
2. Select paper size and then press the enter key.
3. Select paper type and then press the enter key.
(6) Checking the total counter and printing out the
counter report
Checks the total count of copies, etc., and prints out
the information as a counter report.
1. Select [Counter check] and then press the enter
key.
2. Select [Output count] or [Scan count] and then
press the enter key.
3. Select [End] and then press the enter key.
4. Select [Print counter report] and then press the
enter key to print out a counter report.
(7) Report output
Prints out one of the status report.
1. Select [Print Report] and then press the enter key.
2. Select the report to print out and then press the
enter key.
[Copy report]
[Machine report]
[Coverage report]
The selected status report will be printed out.
(8) Language setting
Switches the language to be displayed on the opera-
tion panel.
1. Select [Language] and then press the enter key.
2. Select the language to use and then press the enter
key.
Available languages:
Inch specifications
Japanese, English, French and Spanish
Metric specifications
English, German, French, Spanish and Italian