2KJ/2KH-1
1-3-48
U260
Selecting the timing for copy counting
Description
Changes the copy count timing for the total counter and other counters.
Purpose
To be set according to user (copy service provider) request.
If a paper jam occurs frequently in the optional document finisher when the number of copies is counted at the
time of paper ejection, copies are provided without copy counts. The copy service provider cannot charge for
such copying. To prevent this, the copy timing should be made earlier.
If a paper jam occurs frequently in the paper conveying or fuser sections when the number of copies is
counted before the paper reaches those sections, copying is charged without a copy being made. To prevent
this, the copy timing should be made later.
Setting
1. Press the start key.
2. Select the copy count timing using the cursor up/down keys.
Initial setting: EJECT
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U264
Setting the display order of the date
Description
Selects year, month and day as the order of that appears on lists, etc.
Purpose
Set according to the user preference.
Setting
1. Press the start key.
2. Select the desired order using the cursor up/down keys.
Initial setting: MONTH-DATE-YEAR (for the inch specifications)
DATE-MONTH-YEAR (for the metric specifications)
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U265
Setting OEM purchaser code
Description
Sets the OEM purchaser code.
Purpose
Sets the code when replacing the main PWB and the like.
Setting
1. Press the start key.
2. Change the preset value using the numeric keys or cursor left/right keys.
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
FEED When secondary paper feed starts
EJECT When the paper is ejected
Display Setting
YEAR-MONTH-DATE Year/Month/Day
MONTH-DATE-YEAR Month/Day/Year
DATE-MONTH-YEAR Day/Month/Year
To Next Page
Loading...
