Kyocera TASKalfa 181 - Setting: Density in Photo Mode; Setting: Density in Text in Fax Mode; Setting: Density in Photo in Fax Mode

2KJ/2KH
1-3-32
U093
Setting: Density in photo mode
1. Select the item to be set using the cursor up/down keys.
2. Adjust the setting using the cursor left/right keys.
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Setting: Density in text in fax mode
1. Select the item to be set using the cursor up/down keys.
2. Adjust the setting using the cursor left/right keys.
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Setting: Density in photo in fax mode
1. Select the item to be set using the cursor up/down keys.
2. Adjust the setting using the cursor left/right keys.
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt copying mode
(which is activated by pressing the interrupt key).
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description Setting
range
Initial
setting
PHOTO DARKER Change in density when manual density is set dark 0 to 3 0
PHOTO LIGTER Change in density when manual density is set light 0 to 3 0
Display Description Setting
range
Initial
setting
FAX TEXT DARKER Change in density when manual density is set
dark
0 to 4 2
FAX TEXT LIGHTER Change in density when manual density is set
light
0 to 4 2
Display Description Setting
range
Initial
setting
FAX PHOTO DARKER Change in density when manual density is set
dark
0 to 6 3
FAX PHOTO LIGTER Change in density when manual density is set
light
0 to 6 3