2KJ/2KH
1-3-59
U904
Checking/clearing the service call counts
Description
Displays or clears the service call code counts by types.
Purpose
To check the service call code status by types. Also to clear the service call code counts after replacing con-
sumable parts.
Method
1. Press the start key.
2. Select the item using the cursor up/down keys.
3. Press the start key. The screen for executing is displayed.
4. Change the screen using the cursor left/right keys.
Method: Clears the service call counts
1. Select [ALL] using the cursor up/down keys.
The individual counter cannot be cleared.
2. Press the start key. The count is cleared.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U905
Checking counts by optional devices
Description
Displays the counts of DP or finisher.
Purpose
To check the use of DP and finisher.
Method
1. Press the start key.
2. Select the device, the count of which is to be checked using the cursor up/down keys.
3. Press the start key. The count of the selected device is displayed.
DP
Finisher
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
COUNT Displays/clears the service call counts
TOTAL COUNT Displays the total service call counts
Display Description
DP Counts of optional DP
FINISHER Counts of optional finisher
Display Description
ADP No. of single-sided originals that has passed through the DP
RADP No. of double-sided originals that has passed through the DP
Display Description
CP CNT No. of copies that has passed
STAPLE Frequency the stapler has been activated
BUNDLE EJECT Frequency the bundle discharge has been activated
To Next Page
Loading...
