Kyocera TASKalfa 181 - Page 29

2KJ/2KH
1-2-9
1. Load paper in the cassette.
1. Connect the power cord to the connector on
the machine.
2. Insert the power plug into the wall outlet.
1. Turn the main power switch on. Toner instal-
lation is started.
2. The drive chain is disengaged when toner
installation is completed.
Run maintenance mode U130 if [Add Toner]
remains displayed even after the drive chain
is disengaged.
1. Enter the maintenance mode by entering
10871087 using the numeric keys.
2. Enter 000 using the numeric keys and press
the start key.
3. Select MAINTENANCE and press the start
key to output a list of the current settings of
the maintenance items.
4. Press the stop/clear key.
1. Enter 001 using the numeric keys and press
the start key. The machine exits the mainte-
nance mode.
1. Place an original and make test copies.
1. According to need, attach the correspond
operation label.
Load paper.
Connect the power cord.
Installing toner.
Output an own-status report (maintenance item U000).
Exit maintenance mode.
Make test copies.
Attaching the operation label.