EasyManuals Logo

LaserLine Flatwork Ironer Series User Manual

Default Icon
238 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
GL16 Preventive Maintenance
4-1
Chapter 4
PREVENTIVE MAINTENANCE
Various components of the GL16 require scheduled attention to ensure long life and trouble-free
operation. The Preventive Maintenance (PM) Schedule below outlines all of the PM tasks required at
regular intervals. All tasks are the responsibility of maintenance personnel unless otherwise indicated.
Since operators run the machines, they should be trained on site to visually inspect common areas daily
and notify maintenance personnel when problems are found (i.e., worn or broken ribbons). All PM
intervals are based on 8-hour/day operation. Increase the PM frequency for two or three shift operations.
Preventive maintenance should only be done when the unit is completely cool and the power is turned
OFF at the main disconnect switch. Specific preventive maintenance that requires the unit to be running
should be done with extreme caution and attention to detail.
NOITAREPOKEEWREPSRUOH04NODESABSKSATFOYCNEUQERF
sksaTecnanetniaMevitneverP rotarepO ecnanetniaM noitidnoCrenorI
YLIAD1.4
ssenilnaelClareneG X looC/rewoPtcennocsiD/ffO
sretliFriArewolBnoitsubmoCnaelC X looC/rewoPtcennocsiD/ffO
sepaTediuGkcehC X looC/rewoPtcennocsiD/ffO
drauGregniFytefaSdeR&snottuBPOTSdeRkcehC XX looC/gninnuR
noitceSgninorIxaW X toH/gninnuR
YLKEEW2.4
noitidnoCnobbiRkcehC X looC/gninnuR
)stinuRepyT(tleBevirDkcehC X looC/rewoPtcennocsiD/ffO
srevoClloRnoisserpmoCkcehC X looC/rewoPtcennocsiD/ffO
slenaPecivreSdniheBnaelC X looC/rewoPtcennocsiD/ffO
rednilyCgninorIkcehC X looC/rewoPtcennocsiD/ffO
sgniraeB"ylkeeWesaerG" X looC/rewoPtcennocsiD/ffO
stoviPgniraeBlloRliO X looC/rewoPtcennocsiD/ffO
rednilyCgninorIedisnIdleihStaeHnaelC X looC/rewoPtcennocsiD/ffO
retrevnInaelC/kcehC X looC/rewoPtcennocsiD/ffO
srotoMnaelC/kcehC X looC/rewoPtcennocsiD/ffO
sleehWrewolBtsuahxE&sehctiwSliaSnaelC/kcehC X looC/rewoPtcennocsiD/ffO
leehWrewolBnoitsubmoCnaelC/kcehC X looC/rewoPtcennocsiD/ffO
YLHTNOM3.4
sgniraeBesaerG X looC/rewoPtcennocsiD/ffO
swercsteSkcehC X looC/rewoPtcennocsiD/ffO
srennacSemalFVU&srosneSerutarepmeTsselhcuoTnaelC X looC/rewoPtcennocsiD/ffO
sniahCevirDliO X looC/rewoPtcennocsiD/ffO
erusserPlloRnoisserpmoCkcehC X looC/gninnuR
LAUNNA-IMES4.4
tneVrotalugeRsaGnaelC/kcehC X looC/rewoPtcennocsiD/ffO
erusserPsaGkcehC X looC/rewoPtcennocsiD/ffO
stinUnoitcudeRraeGniliOegnahC X looC/rewoPtcennocsiD/ffO
ylbmessAtoliP&gulPkrapSnaelC/kcehC X looC/rewoPtcennocsiD/ffO
snoitcennoClacirtcelE/lacinahceMkcehC X looC/rewoPtcennocsiD/ffO

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LaserLine Flatwork Ironer Series and is the answer not in the manual?

LaserLine Flatwork Ironer Series Specifications

General IconGeneral
BrandLaserLine
ModelFlatwork Ironer Series
CategoryIron
LanguageEnglish