X-Stream Operator’s Manual
WM-OM-E Rev I 31
compatible probes; supports ProLink-SMA and ProLink-BNC adapters (ProLink is not available for
WavePro 7000A series)
Scale Factors: Automatically or manually selected depending on probe used
AP-1M Hi-Z Adapter: (not available for WavePro 7000A series) Bandwidth: 500 MHz; full-scale
range: +/-8 V; input protection: +/-150 V
Color Waveform Display
Type: Color 10.4-inch flat panel TFT LCD with high resolution touch screen
Resolution: SVGA; 800 x 600 pixels
Real Time Clock: Date, hours, minutes, and seconds displayed with waveform; SNTP support to
synchronize to precision internet clocks
Number of Traces: Maximum of eight traces; simultaneously displays channel, zoom, memory,
and math traces
Grid Styles: Single, Dual, Quad, Octal, XY, Single+XY, Dual+XY
Waveform Display Styles: Sample dots joined or dots only
Analog Persistence Display
Analog and Color-graded Persistence: Variable saturation levels; stores each trace's
persistence data in memory
Persistence Selections: Select analog, color, or 3-D
Trace Selection: Activate Analog Persistence on all or any combination of traces
Persistence Aging Time: From 500 ms to infinity
Sweeps Displayed: All accumulated or all accumulated with last trace highlighted
Zoom Expansion Traces
Display up to 4 Zoom and 4 Math/Zoom traces; 8 Math/Zoom traces available with XMAP (Master
Analysis Package) and XMATH (Advanced Math Package) options.
Rapid Signal Processing
Processor: Intel® Pentium 4 @ 2.53 GHz (or better) with MS Windows® XP Platform
Processor Memory: Up to 1 Gbyte (WaveMaster: up to 2 Gbytes with XXL memory option)
Internal Waveform Memory
Waveform: M1, M2, M3, M4 (Store full-length waveforms with 16 bits/data point.) Or save to any
number of files (limited only by data storage media).
Setup Storage
Front Panel and Instrument Status: Save to the internal hard drive, floppy drive, or to a USB
connected peripheral device.
To Next Page
Loading...
Need help?
General
