Figure 76. Installing a standard heat sink
Figure 77. Installing a performance heat sink
a. Align the triangular mark and screws on the heat sink with the triangular mark and threaded
posts on the processor socket; then install the heat sink on the processor socket.
b.
Fully tighten all the screws in the installation sequence shown on the heat-sink label.
After you finish
1. Install the system fan cage if you have removed it. See
“Install the system fan cage” on page 147.
2. Complete the parts replacement. See
“Complete the parts replacement” on page 151.
Chapter 5. Hardware replacement procedures 111
To Next Page
Loading...
