Figure 108. Installing the system fan cage
Step 1. Align the system fan cage with the mounting guides on both sides of chassis, and lower it into
the chassis.
Step 2.
Rotate the fan cage levers down until the fan cage clicks into place.
Note: If there are system fans installed in the system fan cage, ensure that the system fans are
correctly connected to the system fan connectors on the system board assembly.
After you finish
1. If you have removed the system fans, reinstall them. See
“Install a system fan” on page 143.
2. Complete the parts replacement. See
“Complete the parts replacement” on page 151.
Top cover replacement
Follow instructions in this section to remove and install the top cover.
• “Remove the top cover” on page 148
• “Install the top cover” on page 150
Remove the top cover
Follow instructions in this section to remove the top cover.
S014
148 ThinkSystem SR655 V3 User Guide
To Next Page
Loading...
