Table 10. Parts list (continued)
Index Description
Tier 1 CRU Tier 2 CRU
FRU
Consuma-
ble and
Structural
part
25
Front 12 x 3.5-inch drive backplane
√
26
CMOS battery
√
27
Rearwall bracket C1
√
28
Rearwall bracket B1
√
29
Rearwall bracket A1
√
30
Standard air baffle
√
31
Air baffle filler for standard air baffle
√
32
2U standard heat sink
√
33
T-shape performance heat sink
√
34
Processor
√
35
Processor board
√
36
System I/O board
√
37
Firmware and RoT security module
√
38
PIB
√
39
Memory module
√
40
Fan board
√
41
MicroSD card
√
Power cords
Several power cords are available, depending on the country and region where the server is installed.
To view the power cords that are available for the server:
1. Go to:
http://dcsc.lenovo.com/#/
2. Click Preconfigured Model or Configure to order.
3. Enter the machine type and model for your server to display the configurator page.
4. Click Power ➙ Power Cables to see all line cords.
Notes:
• For your safety, a power cord with a grounded attachment plug is provided to use with this product. To
avoid electrical shock, always use the power cord and plug with a properly grounded outlet.
• Power cords for this product that are used in the United States and Canada are listed by Underwriter's
Laboratories (UL) and certified by the Canadian Standards Association (CSA).
Chapter 3. Parts list 29