Lenovo ThinkSystem SR655 V3 - Air Baffle Replacement; Remove the Air Baffle

Rack front
Figure 22. Securing the server to the front of the rack
1
Rack latch
2
Thumbscrew
After you finish
1. Reconnect the power cords and any cables that you removed.
2. Power on the server and any peripheral devices. See
“Power on the server” on page 42.
3. Update the server configuration. See
“Complete the parts replacement” on page 151.
Air baffle replacement
Follow instructions in this section to remove and install the air baffle.
The air baffle varies by the server hardware configuration. Refer to
“Thermal rules” on page 41 to select the
appropriate air baffle for your server. The replacement procedures for the air baffles are the same.
•
“Remove the air baffle” on page 50
• “Install the air baffle” on page 52
Remove the air baffle
Follow instructions in this section to remove the air baffle.
About this task
50 ThinkSystem SR655 V3 User Guide