Lenovo ThinkSystem SR655 V3 - Drive backplane connectors

Figure 111. Example of cable passing through cable wall brackets
Note: Disengage all latches, release tabs, or locks on cable connectors when you disconnect cables from
the system board assembly. Failing to release them before removing the cables will damage the cable
sockets on the system board assembly, which are fragile. Any damage to the cable sockets might require
replacing the processor board or system I/O board.
Identifying connectors
See this section to locate and identify the connectors on the electric boards.
• “Drive backplane connectors” on page 154
For the connectors on system board assembly, see “System-board-assembly connectors” on page 21.
Drive backplane connectors
See this section to locate the connectors in the drive backplanes.
The server supports the following backplanes depending on server configurations:
154
ThinkSystem SR655 V3 User Guide