Lenovo ThinkSystem SR655 V3 - Install the Security Bezel

Figure 94. Removing the security bezel
After you finish
Note: Before you ship the rack with the server installed, reinstall and lock the security bezel into place.
Install the security bezel
Follow instructions in this section to install the security bezel.
About this task
Attention:
• Read
“Installation Guidelines” on page 35 and “Safety inspection checklist” on page 36 to ensure that you
work safely.
• Before you ship the rack with the server installed, reinstall and lock the security bezel into place.
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
BashWCNZQEDP7o3EohXPEV
.
Procedure
Step 1. If the key is held inside the security bezel, remove it out of the security bezel.
Chapter 5. Hardware replacement procedures 125