Lenovo ThinkSystem SR655 V3 - Page 162

Attention: For proper cooling and airflow, reinstall the air baffle before you turn on the server. Operating
the server with the air baffle removed might damage server components.
4. Reinstall the top cover. See
“Install the top cover” on page 150.
5. If the sever was installed in a rack, reinstall the server into the rack. See
“Install the server to rack” on
page 46
.
6. Reconnect the power cords and any cables that you removed.
7. Power on the server and any peripheral devices. See
“Power on the server” on page 42.
8. Update the server configuration.
• Download and install the latest device drivers:
http://datacentersupport.lenovo.com.
• Update the system firmware. See
“Update the firmware” on page 190.
• Update the UEFI configuration. See
https://pubs.lenovo.com/uefi-overview.
• Reconfigure the disk arrays if you have installed or removed a hot-swap drive or a RAID adapter. See
https://sysmgt.lenovofiles.com/help/topic/lxpm_frontend/lxpm_product_page.html for the LXPM
documentation compatible with your server.
152
ThinkSystem SR655 V3 User Guide