Figure 120. Power cable connections for 8 x 2.5-inch front drive backplanes
From To
1 Backplane 1: PWR 1 Backplane 1 power connector on the system board
assembly
2 Backplane 2: PWR 2 Backplane 2 power connector on the system board
assembly
3 Backplane 3: PWR 3 Backplane 3 power connector on the system board
assembly
Signal cable connections
Refer to the specific topic for signal cable connections depending on the backplanes installed.
• One front backplane:
–
“One 8 x SAS/SATA backplane” on page 166
– “One 8 x AnyBay backplane” on page 169
• Two front backplanes:
164 ThinkSystem SR655 V3 User Guide