1
Rack latch (Mounting ear)
Step 3. Remove the server from the rack.
CAUTION:
Make sure three people are lifting the sever by holding the lift points.
Rack front
Figure 15. Lifting up the server
1
Lift point
Rack Front
Figure 16. Removing the server from the rack.
1
Release tab
a.
Press the release tabs to disengage the rails from the server.
b.
Carefully lift up the front end of the server slightly to detach the nailheads from the slots on
the rails.
Chapter 5. Hardware replacement procedures 45
To Next Page
Loading...
