• Read “Installation Guidelines” on page 35 and “Safety inspection checklist” on page 36 to ensure that you
work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
BashWCNZQEDP7o3EohXPEV
.
Procedure
Step 1. Remove the OCP module.
Figure 54. Removing the OCP module
a. Loosen the thumbscrew that secures the card.
b.
Pull out the OCP module.
Step 2. (Optional) Remove the OCP label.
Figure 55. Removing the OCP label
86 ThinkSystem SR655 V3 User Guide
To Next Page
Loading...
