Lenze 8200 vector series Mounting Instructions


100
EDK82EV903 DE/EN/FR 5.1
Identification
  
E82xV xxx K x B xxx 3x 3x
Prod.-IDProd.-ID
Prod.-No.Prod.-No.
Ser.-No.Ser.-No.
VersionVersion
InputInput
OutputOutput
TypeType
nash_elmo Industries GmbH Industriestrasse 26 D-97616 Bad Neustadt
Type
E = panel−mounted device
D = panel−mounted device in
push−through design
C = panel−mounted device in
cold plate design
Power
(e.g. 153 = 15 ´ 103 W = 15 kW)
(e.g. 903 = 90 ´ 10
3
W = 90 kW)
15 ... 90 kW
Voltage class
4 = 400 V/500 V
Version
Design, variant
1xx = for IT systems
2xx = without integrated filters
3xx = with footprint mains filters
x4x = with "Safe torque off" function
Hardware version
Software version
0Fig. 0Tab. 0
 Tip!
Information and auxiliary devices related to the Lenze products can be found in the
download area at
http://www.Lenze.com

Lenze 8200 vector series Specifications

General

Category	DC Drives
Overload capacity	150% for 60 seconds
Protection class	IP20
Mains voltage	380V to 480V AC
Control method	Vector control
Communication options	CANopen
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature, short circuit
Humidity	≤ 95% relative humidity, non-condensing
Series	8200 vector