Lenze 8200 vector series Mounting Instructions


99
EDK82EV903 DE/EN/FR 5.1
E82EV753K4B ... E82EV903K4B
(fold−out page on the right)
Scope of supply and connections
Position Description
 8200 vector frequency inverter
 Fixing bracket for standard mounting  135

Blanking covers (2 pieces) for interfaces FIF I and FIF II  162
 EMC shield sheet with fixing screws for shielded control cables  142
 Cover with fixing screws
 Shield clamp and strain relief for the motor cable
 154
 Strain relief for the protective earth cable of the motor and the incoming cable of the motor tempera-
ture monitoring with PTC thermistor (PTC) or thermal contact (NC contact)
 Label (required for mounting in accordance with UL)  119
T1, T2 PTC connection or thermal contact (NC contact) of the motor  154
U, V, W, PE Motor connection  154
L1, L2, L3, PE Mains connection  151
+U
G
, −U
G
DC supply
X1.2 Terminal strip for connection of relay output K1
 155
X1.3 Terminal strip for connection of relay output K2
X3.1 Terminal strip for connection of relay output K
SR
for "safe standstill" (only for variant Bx4x)  157

Lenze 8200 vector series Specifications

General

Category	DC Drives
Overload capacity	150% for 60 seconds
Protection class	IP20
Mains voltage	380V to 480V AC
Control method	Vector control
Communication options	CANopen
Protection features	Overcurrent, overvoltage, undervoltage, overtemperature, short circuit
Humidity	≤ 95% relative humidity, non-condensing
Series	8200 vector