Lenze EVS 9300 series - Page 234

Function library
Function blocks
9.2.27 Digital frequency ramp function generator (DFRFG)
9-108
L
EDSVS9332S-D11 EN 3.0
9.2.27.6 Start via touch probe initiator (terminal X5/E5)
Stop!
In the default setting the terminal X5/E5 is assigned to another function.
Function
z Set C0757 = 1.
z The function is activated by simultaneously setting the inputs:
– DFRFG-QSP and DFRFG-RESET = HIGH.
z Starting procedure:
– Signals at DFRFG-QSP and DFRFG-RESET = LOW.
– Otherwise touch probe signals are ignored.
z A LOW-HIGH edge at terminal X5/E5 starts the process:
t
DFRFG-RESET
DFRFG-QSP
Touch-Probe X5/E5
DFRFG-OUT
DFRFG-IN
Fig. 9-70 Start via touch probe initiator (terminal X5/E5)