Function library
Function blocks
9.2.27 Digital frequency ramp function generator (DFRFG)
9-107
L
EDSVS9332S-D11 EN 3.0
9.2.27.4 RESET
DFRFG-RESET = HIGH:
z Resets setpoint phases which are internally added.
z Activates the profile generator.
z HIGH-LOW edge at DFRFG-RESET: Detecting the setpoint phase.
9.2.27.5 Detect phase difference
Monitoring the phase difference between input DFRFG-IN and output DFRFG-OUT.
z Set limit value of monitoring via C0754.
z Activate the monitoring: DFRFG-FAIL = HIGH
z Store the signal until DFRFG-RESET = HIGH.
z The profile generator can accept a phase difference of up to ±2140000000 inc
(= 32000 revolutions).
To Next Page
Loading...