Function library
Monitorings
9.3.3 Monitoring functions
9-228
L
EDSVS9332S-D11 EN 3.0
9.3.3.6 Fault after automatic adjustment H30
Purpose
Controller protection
Function
This monitoring is only effective if a control type with history buffer is used. It does not provide an
additional binary output.
This indication is generated if an internal automatic adjustment has failed during mains switching.
Please contact Lenze.
The controller can only be reset by mains switching.
Features:
z LECOM no.: 130
z Reaction: TRIP (cannot be modified)
To Next Page
Loading...