Function library
Monitorings
9.3.3 Monitoring functions
9-227
L
EDSVS9332S-D11 EN 3.0
9.3.3.5 Power stage identification H07
Purpose
Controller protection
Function
This monitoring is only effective if a control type with history buffer is used. It does not provide an
additional binary output.
If this monitoring reacts, the controller has detected an incorrect power stage. This indication can
only be reset by mains switching.
If this indication should occur again, please contact Lenze.
Features:
z LECOM no.: 107
z Reaction: TRIP (cannot be modified)
To Next Page
Loading...