Function library
Monitorings
9.3.3 Monitoring functions
9-226
L
EDSVS9332S-D11 EN 3.0
9.3.3.4 Fault in the resolver driver H06
Purpose
Controller protection.
Function
This monitoring is only effective if a control system with history buffer is used. It does not provide an
additional binary output.
This message is generated if a fault occurs in the resolver driver during mains connection. In this
case, please contact Lenze.
A reset is only possible by mains switching.
Features:
z LECOM No.: 106
z Reaction: TRIP (cannot be modified)
To Next Page
Loading...