Chapter 2
| Using the Web Interface
Navigating the Web Browser Interface
– 49 –
Mirror
129
Add Sets the source and target ports for mirroring 129
Show Shows the configured mirror sessions 129
RSPAN Mirrors traffic from remote switches for analysis at a destination port on
the local switch
130
Traffic Segmentation 135
Configure Global Enables traffic segmentation globally 135
Configure Session Configures the uplink and down-link ports for a segmented group of
ports
136
VLAN Virtual LAN 139
Static 142
Add Creates VLAN groups 142
Show Displays configured VLAN groups 142
Modify Configures group name and administrative status 142
Edit Member by VLAN Specifies VLAN attributes per VLAN 144
Edit Member by Interface Specifies VLAN attributes per interface 144
Edit Member by Interface Range Specifies VLAN attributes per interface range 144
Protocol 148
Configure Protocol 149
Add Creates a protocol group, specifying supported protocols 149
Show Shows configured protocol groups 149
Configure Interface 150
Add Maps a protocol group to a VLAN 150
Show Shows the protocol groups mapped to each VLAN 150
MAC-Based 152
Add Maps traffic with specified source MAC address to a VLAN 152
Show Shows source MAC address to VLAN mapping 152
MAC Address 155
Dynamic
Configure Aging Sets timeout for dynamically learned entries 159
Show Dynamic MAC Displays dynamic entries in the address table 159
Clear Dynamic MAC Removes any learned entries from the forwarding database and clears
the transmit and receive counts for any static or system configured
entries
161
Learning Status Enables MAC address learning on selected interfaces 155
Table 4: Switch Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
