93
◆ Logging - Enables logging of matching frames to the system log. (Default: Disabled)
Open the System Log Information menu to view any entries stored in the system log for this
entry. Related entries will be displayed under the “Info” or “All” logging levels.
◆ Shutdown - Shuts down a port when a macthing frame is seen.
(Default: Disabled)
◆ Counter - The number of frames which have matched any of the rules defined in the
selected policy.
WEB INTERFACE
To configure ACL policies and responses for a port:
1. Click Configuration, ACL, Ports.
2. ssign an ACL policy configured on the ACE Configuration page, specify the responses to
invoke when a matching frame is seen, including the filter mode, copying matching frames to
another port, logging matching frames, or shutting down the port. Note that the setting for
rate limiting is implemented regardless of whether or not a matching packet is seen.
3. Repeat the preceding step for each port to which an ACL will be applied.
4. Click Save.
Configuring Rate Limiters
Use the ACL Rate Limiter Configuration page to define the rate limits applied to a port (as
configured either through the ACL Ports Configuration menu or the Access Control List
Configuration menu.
PATH
Configuration \ Security \ Network \ ACL \ Rate Limiters
Figure 33: ACL Rate Limiter Configuration
To Next Page
Loading...
