Publication date: June, 2015
Revision A1
RADIUS Accounting Statistics
The statistics map closely to those specified in RFC4670 - RADIUS Accounting Client MIB.
Use the server select box to switch between the backend servers to show details for.
Packet Counters
RADIUS accounting server packet counter. There are five receive and four transmit counters.
radiusAccClientExtResponses
The number of RADIUS packets (valid
or invalid) received from the server.
radiusAccClientExtMalformed
Responses
The number of malformed RADIUS
packets received from the server.
Malformed packets include packets
with an invalid length. Bad
authenticators or unknown types are
not included as malformed access
responses.
radiusAcctClientExtBadAuthen
ticators
The number of RADIUS packets
containing invalid authenticators
received from the server.
radiusAccClientExtUnknownTy
pes
The number of RADIUS packets of
unknown types that were received
from the server on the accounting
port.
radiusAccClientExtPacketsDro
pped
The number of RADIUS packets that
were received from the server on the
accounting port and dropped for
some other reason.
radiusAccClientExtRequests
The number of RADIUS packets sent
to the server. This does not include
retransmissions.
radiusAccClientExtRetransmiss
ions
The number of RADIUS packets
retransmitted to the RADIUS
accounting server.
radiusAccClientExtPendingRe
quests
The number of RADIUS packets
destined for the server that have not
yet timed out or received a response.
This variable is incremented when a
Request is sent and decremented due
to receipt of a Response, timeout, or
retransmission.
radiusAccClientExtTimeouts
The number of accounting timeouts
to the server. After a timeout, the
client may retry to the same server,
send to a different server, or give up.
A retry to the same server is counted
as a retransmit as well as a timeout. A
send to a different server is counted
as a Request as well as a timeout.
Other Info
This section contains information about the state of the server and the latest round-trip time.