LevelOne GEP-2651 - Page 49

Publication date: June, 2015
Revision A1
40
2-5.1.5.3 Communities
The function is used to configure SNMPv3 communities. The Community and UserName is
unique. To create a new community account, please check <Add new community> button,
and enter the account information then check <Save>. Max Group Number: 4.
Web Interface
To display the configure SNMP Communities in the web interface:
1. Click SNMP, Communities.
2. Click Add new community.
3. Specify the SNMP communities parameters.
4. Click Apply.
5. If you want to modify or clear the setting then click Reset.
Figure2-5.1.5.3: The SNMPv1/v2 Communities Security Configuration
Parameter description:
 Delete
Check to delete the entry. It will be deleted during the next save.
 Community
Indicates the community access string to permit access to SNMPv3 agent. The allowed
string length is 1 to 32, and the allowed content is ASCII characters from 33 to 126. The
community string will be treated as security name and map a SNMPv1 or SNMPv2c
community string.
 Source IP
Indicates the SNMP access source address. A particular range of source addresses can be
used to restrict source subnet when combined with source mask.
 Source Mask
Indicates the SNMP access source address mask