2-76 MFP Service Manual
7500-XXX
10 Remove the tray 4 media transport assembly from the
TTM.
Go to “2000-sheet dual input (TTM)–tray 4 media
transport assembly removal” on page 4-229.
Inspect the metal tab on the tray 4 media transport
assembly as shown in the graphic below.
Is the metal tab on the tray 4 media transport assembly
bent?
Staighten the metal
tab with needle nose
plyiers or replace the
tray 4 media
transport assembly.
Go to “2000-sheet
dual input (TTM)–
tray 4 media
transport assembly
removal” on
page 4-229.
Go to step 11.
11 Perform a print test.
Does the error still occur?
Replace the 2TM/
TTM controller card
assembly.
Go to “2000-sheet
dual input (TTM)–
2TM/TTM controller
card assembly
removal” on
page 4-274.
Go to step 12.
Problem solved.
12 Perform a print test.
Does the error still occur?
Replace the printer
engine card
assembly.
Go to “Printer
engine card
assembly removal”
on page 4-117.
Problem solved.
Step Check Yes No
To Next Page
Loading...
