4-214 MFP Service Manual
7500-XXX
2000-sheet dual input (TTM)–tray support roll removal
1. Remove tray 3 assembly. See “2000-sheet dual input (TTM)–tray 3 assembly removal” on
page 4-217.
2. Remove tray 4 assembly. See “2000-sheet dual input (TTM)–tray 4 assembly removal” on
page 4-216.
3. Remove the foot cover. See “2000-sheet dual input (TTM)–foot cover removal” on page 4-209.
4. Remove two screws securing the two brackets (A).
5. Remove the two e-clips securing the tray support rolls (B) to the two brackets (A) using a prying tool.
6. Remove the two e-clips securing the tray support rolls (B) to the main frame.
7. Remove the shafts (D).
Front
B
D
A
E-ring
To Next Page
Loading...
