Lexmark X850E - Switch (Platen Interlock) Removal

4-150 MFP Service Manual
7500-XXX
Switch (platen interlock) removal
1. Remove the operator panel assembly. See “Operator panel assembly removal” on page 4-136.
2. Disconnect the connector from the switch (platen interlock) (A).
3. Release the harness of the switch (platen interlock) (A) from the clamp.
4. Remove the screw securing the switch (platen interlock) (A) to the scanner unit assembly.
5. Remove the switch (platen interlock) (A).
A
Connector
Clamp