Lexmark X850E - 2000-Sheet Dual Input (TTM)-Sensor (Tray 3 Feed-Out) Removal

Repair information 4-247
7500-XXX
2000-sheet dual input (TTM)–sensor (tray 3 feed-out) removal
1. Open the left door assembly.
2. Remove two screws securing the bracket (A).
3. Disconnect the connector to the sensor (tray 3 feed-out) (B).
4. Remove the bracket (A).
5. Release the hooks securing the sensor (tray 3 feed-out) (B) to the bracket (A).
6. Remove the sensor (tray 3 feed-out) (B).
A
Connector
Hook
B
Actuator