Lexmark X850E - Sensor (Registration) Removal

Repair information 4-81
7500-XXX
Sensor (registration) removal
1. Remove the MPF rear cover. See “MPF rear cover removal” on page 4-58.
2. Remove the MPF feed unit assembly. See “MPF feed unit assembly removal” on page 4-54.
3. Remove the printer left door assembly. See “Printer left door assembly removal” on page 4-75.
4. Remove the registration roll assembly. See “Registration roll assembly removal” on page 4-79.
5. Release the hooks securing the sensor (registration) (A) to the registration roll assembly (B).
6. Remove the sensor (registration) (A).
7. Disconnect the connector from the sensor (registration).
Hook
A
B
Front
Hooks
Front
A