4-248 MFP Service Manual
7500-XXX
2000-sheet dual input (TTM)–media feed lift motor removal
1. Remove the media feed unit assembly. See “2000-sheet dual input (TTM)–media feed unit assembly
removal (tray 3)” on page 4-243 or “2000-sheet dual input (TTM)–media feed unit assembly
removal (tray 4)” on page 4-239.
2. Disconnect the harness from the media feed lift motor (A).
3. Remove the two screws securing the media feed lift motor to the media feed unit assembly (B).
4. Remove the media feed lift motor (B).
A
B
Connector
Rear
To Next Page
Loading...
