Lexmark X850E - Printer Engine Card Assembly Removal

Repair information 4-117
7500-XXX
7. Remove the exit 2 card assembly (A).
Printer engine card assembly removal
1. Remove the rear RIP card cover. See “Rear RIP card cover removal” on page 4-13.
2. Remove the rear motor cover. See “Rear motor cover removal” on page 4-11.
3. Remove the rear lower cover. See “Rear lower cover removal” on page 4-12.
4. Disconnect all the connectors from the engine controller card assembly (A).
Note: Connectors P405, P414, P416, and P400 have a hook that must be released.
5. Remove the six screws securing the printer engine card assembly (A).
P431
P430
P432
P434
P433
A