Lexmark X850E - 2000-Sheet Dual Input (TTM)-One-Way Clutch; Gear Assembly Removal

4-250 MFP Service Manual
7500-XXX
2000-sheet dual input (TTM)–one-way clutch / gear assembly removal
1. Remove the media feed unit assembly. See “2000-sheet dual input (TTM)–media feed unit assembly
removal (tray 3)” on page 4-243 or “2000-sheet dual input (TTM)–media feed unit assembly
removal (tray 4)” on page 4-239.
2. Remove the harness from the bracket (A).
3. Remove the three screws securing the bracket (A) to the media feed unit assembly.
4. Remove the bracket (A).
Note: The gears may become detached from the bracket (A).
5. Remove the tray lift one-way clutch (B).
Harness
Washer
Clamp
A
Rear
B