Lexmark X850E - MPF Media out Actuator and Upper Frame Removal

Repair information 4-55
7500-XXX
MPF media out actuator and upper frame removal
1. Remove the MPF rear cover. See “MPF rear cover removal” on page 4-58.
2. Remove the MPF feed unit assembly. “MPF feed unit assembly removal” on page 4-54.
3. Remove the two hooks securing the upper frame (A).
4. Remove the upper frame (A) by moving it up and out in the direction of the arrow.
5. Remove the MPF media out actuator (B) by prying it outward with a flat tip screwdriver, then slide it out in
the direction of the arrow.
Hook
Hook
(Upper frame)
Slot
B
Right
A