Lexmark X850E - 2000-Sheet Dual Input (TTM)-Sensor (Tray 4 Feed-Out) Removal

Repair information 4-241
7500-XXX
2000-sheet dual input (TTM)–sensor (tray 4 feed-out) removal
1. Remove the tray 3 assembly. See “2000-sheet dual input (TTM)–tray 3 assembly removal” on
page 4-217.
2. Remove the tray 4 assembly. See “2000-sheet dual input (TTM)–tray 4 assembly removal” on
page 4-216.
3. Disconnect the connector from the sensor (tray 4 feed-out) (A).
4. Release the hooks securing the sensor (tray 4 feed-out) (A) to the upper guide (B).
5. Remove the sensor (tray 4 feed-out) (A).
Hook
A
Connector
B
Front