Lexmark X850E - 2000-Sheet Dual Input (TTM)-Tray 3 Front Cable Assembly Removal

4-222 MFP Service Manual
7500-XXX
2000-sheet dual input (TTM)–tray 3 front cable assembly removal
1. Remove the left cover. See “2000-sheet dual input (TTM)–left cover removal” on page 4-211.
2. Remove the tray 3 assembly. See “2000-sheet dual input (TTM)–tray 3 assembly removal” on
page 4-217.
3. Remove the tray 3 front cover. See “2000-sheet dual input (TTM)–tray 3 front cover removal” on
page 4-218.
4. Remove the E-clip with a prying tool securing the tray lift pulley (A) to the tray lift shaft assembly (B).
5. Remove the lift cable pulley (A).
Note: The tray 3 front cables (C) become detached.
6. Remove the tray 3 front cables (C) from the tray lift shaft assembly (B).