Lexmark X850E - Exit 2 Left Door Handle Removal; Exit 2 Unit Docking Lever Removal

4-316 MFP Service Manual
7500-XXX
Exit 2 unit docking lever removal
1. Remove the exit 2 unit assembly. See “Exit 2 unit assembly removal” on page 4-315.
2. Remove the two exit 2 unit docking levers (A) with a prying tool from the brackets (B).
Note: When removing the two exit 2 docking levers, ensure the brackets (B) are not bent or deformed.
3. Remove the springs (C) from the brackets (B).
Exit 2 left door handle removal
FRONT
REAR
ACB
A
C
B